Fcp euro

/r/Audi

2009.01.08 23:49 /r/Audi

A Reddit community for Audi Enthusiasts and those who love four rings
[link]

2014.02.13 05:13 Lyrr3d BMW Technical support

A subreddit for BMW technical support.
[link]

2013.04.04 04:48 Rifta21 BMW E90/E91/E92/E93

Hub for all BMW 3 series, 2006-2013. Anyone is welcome!
[link]

2023.05.30 07:37 e34it Fuel Line $$$ - What Happened?!

Fuel Line $$$ - What Happened?!
I was hoping to replace my m52 swap’s fuel rail feed line for a reasonable price and found this FCP link for 5 meters of CRP 8x13 for $14. But it’s out of stock everywhere, and the genuine listed below is $53 for 1 meter! Plus the next best price I can find is $25.45 for 1 meter from the same brand?!??! Auto parts stores are about the same at $7-10 per foot for 5/16 inch high pressure.
I get supply chain issues and all that, but now I can’t even get an uncut 5m piece from FCP CRP, and at around $25 per 1 meter section that makes ~$125 for 5 pieces of 1 meter (as compared to $14)! What happened?!
submitted by e34it to E30 [link] [comments]

2023.05.29 22:20 CaseyGamer64YT What were these race cars I saw at lime rock today?

What were these race cars I saw at lime rock today? submitted by CaseyGamer64YT to whatisthiscar [link] [comments]

2023.05.29 16:53 spicyseth Sharing some photos from the FCP Euro Lime Rock Park meet

Sharing some photos from the FCP Euro Lime Rock Park meet
May have to click the image to see full shot Give the SPA's more love
submitted by spicyseth to Volvo [link] [comments]

2023.05.29 16:38 Yah_Boi_69 Do any 850 owners have experience with these struts?

Do any 850 owners have experience with these struts? submitted by Yah_Boi_69 to Volvo [link] [comments]

2023.05.29 16:36 Yah_Boi_69 Anyone have any experience with these

Anyone have any experience with these submitted by Yah_Boi_69 to Volvo850 [link] [comments]

2023.05.29 06:49 artorres21 FCPEuro VW Maintenance Kit

FCPEuro VW Maintenance Kit
What’s up guys, bought a 2016 GTI S last month and looking to do some maintenance. It’s got 48,000 miles on it. There’s a kit on sale on FCP Euro for Liqui Moly oil change kit, spark plugs and Mann filters.
Wondering if it’s a good deal, or anywhere else I should look? Molygen vs Leichtlauf? Mann vs Hengst filters? And are the NGK spark plugs recommended over OE, or what’s a better replacement. Don’t really plan on modifying anything anytime soon in terms on tuning. Mainly leaning towards FCP because of their lifetime warranty coverage, but any advice/suggestions are welcome. Thanks in advance.
submitted by artorres21 to GolfGTI [link] [comments]

2023.05.29 02:48 epicbro101 Tuned MK6 Misfire Diag. Help

Wondering if anyone can help me start diagnosing. For reference i have a 2011 GTI w/ DSG that ive been APR tuned on since November 2020. I replaced coils and plugs in November 2022 (red top coils and oem ngk plugs) and the last couple months whenever i give it hard accel the car hesitates and i can feel and hear it. Funny thing is ive been brushing this off as the transmission slipping because thats known to happen when you tune the engine but not the trans. Ive never gotten a CEL or flashing CEL that was bc of a misfire, until last night when i guess i stayed in it a bit longer and i got a flashing CEL (misfire). I kind of had an “aha!” moment but now i get to figure out why the car has been misfiring for the past few months. I have OBDeleven and i obv scanned it right as i got home and i had three codes: random misfire (p0300), cylinder 2 misfire (p0302), and turbo underboost (p0299). I bought the coils and plugs through FCP euro so i wouldn’t mind just replacing those to start or swapping coils around to see if the cylinder follows. Thanks in advance for help.
submitted by epicbro101 to GolfGTI [link] [comments]

2023.05.28 03:47 NiceAhhHandSoap455 Bad idea or good idea

Bad idea or good idea
So shift linkage came apart while driving, would it be a bad idea to weld these two parts together?? It’s an arm connecting from trans to the shifter. Asking bc I accidentally made the inside of the hole uneven
submitted by NiceAhhHandSoap455 to BMW [link] [comments]

2023.05.28 02:37 NiceAhhHandSoap455 Bad idea or no ?

Bad idea or no ?
Bmw e46 selector rod joint is uneven on the inside(Idek how I did that) but would it be a bad idea to just weld it to the rod? It’s suppose to stay in place anyways so it doesn’t seem like a terrible idea.
submitted by NiceAhhHandSoap455 to MechanicAdvice [link] [comments]

2023.05.26 21:51 No_Experience_8558 Any canadian site that supplies OE or OEM bmw parts? Alternative fcp euro for canadian market?

Currently looking for front forward control arms for my e90 but haven't seen any supplying lemforder control arms.
submitted by No_Experience_8558 to E90 [link] [comments]

2023.05.26 20:42 yabigboi802 What’s the best video guide for a cooling system refresh?

I bought the basic cooling system refresh kit on FCP euro, and also a new fan blade, serpentine belt, and AC drive belt; and am wondering what the best video to guide me through it will be. I’d prefer a video that just shows all the basic stuff like the water pump, expansion tank, hoses, and thermostat, versus everything including the radiator
Also, do I need a T50 & T60 or just a T50? 02’ 330xi AT
submitted by yabigboi802 to e46 [link] [comments]

2023.05.25 02:19 Sconleyy How can I get my hands on some mats that resemble these?

How can I get my hands on some mats that resemble these?
Get interior and need some mats
Thanks guys
submitted by Sconleyy to e46 [link] [comments]

2023.05.25 00:40 VenomRek Would this be a good radiator to buy?

Would this be a good radiator to buy?
I have a 2004 325CI M56 5speed manual, recently discovered a leak in my radiator. I replaced the upper radiator hose because I originally thought that was the source of the leak, but it is the radiator right behind the upper radiator hose. I was wondering if this would be a better option than an OEM radiator. Any feedback appreciated!!
submitted by VenomRek to e46 [link] [comments]

2023.05.23 02:15 Jumpy_Ad_9487 I’ve provided a list of my costs for rebuilding my S50 M3 engine. Pistons and con rods where reused. Hoping to assist anyone looking for costs if done DIY as I did.

FCP Euro, ECS tuning, and BimmerWorld were the go to for parts sourcing
Timing locks and vanos tool (is a must I don’t recommend doing it without these tools): $120 Head machined and new valve seals: $300 Spark plugs: $55 Camshaft bearing bridge intake: $500 Camshaft bearing bridge exhaust: $500 Intake and exhaust camshaft: $1,200 Hydraulic lifters: $240 All gaskets: $250 Various non reusable Bolts: $100 Single Vanos rebuild kit: $75 Timing chain guides and chains: $250 Piston rings: $270 WPC treated Rod bearings: $130 WPC treated Crank bearings: $200 Thermostat and water pump: $65
Could have gotten away with not replacing cams but why not.
Total without cams and lifters: $2,785 My Total: $4,225
submitted by Jumpy_Ad_9487 to BMWE36 [link] [comments]

2023.05.22 20:05 TheOneRSdriver OＶＥＲＤＲＩＶＥ family has one open position for the coming season on its top team ①ＶＥＲＤＲＩＶ E. Minimum RP requirement is 1.2M. We are a top 200 55+MRP crew. Daily WC by admin. No mods, no hacks, no cheats. Communication via Line Contact via Line : theone-rs https://line.me/R/ti/g/QdEYfeDwH4

OＶＥＲＤＲＩＶＥ family has one open position for the coming season on its top team ①ＶＥＲＤＲＩＶ E. Minimum RP requirement is 1.2M. We are a top 200 55+MRP crew. Daily WC by admin. No mods, no hacks, no cheats. Communication via Line Contact via Line : theone-rs https://line.me/ti/g/QdEYfeDwH4 submitted by TheOneRSdriver to CSRRecruiting [link] [comments]

2023.05.20 02:53 religionvq Brake kit recommendations? Will these fit my 08.5 GTI selling it soon an I need something basic

Brake kit recommendations? Will these fit my 08.5 GTI selling it soon an I need something basic submitted by religionvq to GolfGTI [link] [comments]

2023.05.19 16:18 Interesting_Ad4841 Carbon cleaning advice

Carbon cleaning advice
As a home mechanic I’m wondering how people feel about doing the carbon cleaning themselves. Myself and my wife work on our cars and we virtually never use a shop for service. I know I need to get it done and I’m very familiar with the FCP Euro kit for walnut blasting the carbon. It is however something I have never done. If you’ve done it yourself please let me know if you have any advice, equally if you recommend letting a shop do it for around $1000.00 please let me know why. Your help and feedback is greatly appreciated.
submitted by Interesting_Ad4841 to GolfGTI [link] [comments]

2023.05.18 23:59 laborinstructor Liqui moly additives?

I used to have a BMW and trusted FCP Euro with everything. I recently heard about all these various liqui moly additives and cleaners and FCP euro seems to promote that they do work and aren’t just snake oil.
Anyone have more insight on whether this is worth it or not? If Cera Tec and Jectron and the gas system cleaner do what they advertise it seems like relatively cheap insurance to help protect an engine. But I am skeptical that they do anything.
TIA for any opinions!
submitted by laborinstructor to JettaGLI [link] [comments]

2023.05.18 17:09 Skippy_99b Has anyone had any experience with any N55 water pumps/thermostats from Amazon?

Please don't just say "I wouldn't" or "buy from FCPEuro" as many people including me have had good luck with parts from Amazon, particularly URO branded parts at less than half the price of the least expensive FCP euro parts. I collect and restore BMWs and own 11 of them. I'm specifically looking for reviews from anyone who has purchased and installed a URO pump/thermostat or any "good" brand N55 pump set from Amazon. If that isn't you, please keep scrolling, you don't need to tell me about parts from China or the FCPEuro warranty. (Sorry to sound snarky, but I am really just looking for recommendations about parts from Amazon from people who have used them and these threads often fill up with completely unrelated comments.) I'm getting ready to replace hoses, pump and thermostat on my E70 N55.
📷All reactions:11
submitted by Skippy_99b to BmwTech [link] [comments]

2023.05.18 14:26 EfficiencyStriking57 Need help finding bolts!

Need help finding bolts!
I am replacing my rear control arms but the kit doesn’t bring bolts to install, I don’t want to reuse the ones on the car, could someone help me figure out which bolts I need for these parts, and if you know where I could get them, I found these from advanced auto parts (2nd pic) but I don’t know if they will fit
submitted by EfficiencyStriking57 to E90 [link] [comments]

2023.05.16 15:55 chris-alex Petty Annoyance: Anyone else find it odd FCP Euro’s summary of the GTI goes in-depth on the GTI W12 as if it were a production car, but makes no mention any of the current gens?

Petty Annoyance: Anyone else find it odd FCP Euro’s summary of the GTI goes in-depth on the GTI W12 as if it were a production car, but makes no mention any of the current gens? submitted by chris-alex to GolfGTI [link] [comments]

2023.05.14 21:10 thecollieman14 PSA: FCP Euro deletes reviews

PSA: FCP Euro deletes reviews
Just went and saw that several of my negative reviews have been removed from their website, so anything you see with a 5 star rating is manufactured.
submitted by thecollieman14 to Golf_R [link] [comments]